Results 1 to 7 of 7
Thread: n00b help with printer
Threaded View
-
11-16-2020, 03:47 PM #4
That is a larger Layer lapse.
When it happens to you hear a grinding noise.
On Which Axis X or Y does the axis layer shifting.
Copied from Web site LABISTS 3D Printer Trouble Shooting Link
Issue Details Layers shift in the z-direction as print progresses
Cause 1 Printer is printing too fast
Suggested Solutions 1
Lower printing speed
Cause 2 There are loose pulleys on the x-axis and/or y-axis
Suggested Solutions 2
Make sure there is no “play” in the pulleys and tighten
Check to see if there is friction on the pulleys and adjust
Cause 3 Belts are skipping teeth on the x-axis and/or y-axis
Suggested Solutions 3
Check for friction along the entire axis
Check that belts are tight and adjust tension screw
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion