Results 1 to 3 of 3
Thread: CreatBot DX3 Mod
Threaded View
-
10-15-2020, 09:40 AM #1
- Join Date
- Oct 2020
- Posts
- 10
CreatBot DX3 Mod
I am attempting to switch out an old PEEK designed hotend with a Prometheus V2. My issue is the new heat block provides a 3mm hole for a cartridge thermistor but the CreatBot’s thermistor has a 4mm cartridge. I am considering machining a new heat block with a bigger hole to fit the thermistor but was also wondering if I could just order an e3d cartridge since it would fit in the block. Does anyone know if this would work or if I am just better off machining a new block?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion