Results 1 to 5 of 5
Threaded View
-
09-27-2020, 06:01 PM #1
- Join Date
- Sep 2020
- Posts
- 2
Please help! Need part for log splitter.
Hi guys. I have only had my Ender 3 for one day and I believe that I have found a use for it. My log splitter "ate" the recoil starter cord which jammed the cooling fan and ruined the cam shape lobe in the middle.
is anyone up to creating a file for me? If so, I will measure the old fan inner and outer diameter and measure the protruding cam on the flywheel for design consideration. i just don't know how to use the software yet.
The old looked like this: https://www.ereplacementparts.com/fa...p-2570365.html
it's cheap enough and I can order one at a low cost, but it would be more fun to print one. I'm just not sure my Ender could handle the width of it, so I guess I need to tear it down and measure the diameter.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help