Results 1 to 3 of 3
Threaded View
-
08-05-2020, 07:41 PM #3
- Join Date
- Jul 2020
- Posts
- 2
I contacted Flash Forge via e-mail, and Tang suggested replacing the stepper motor cable. He was correct - after replacing the cable, I found a small break on one of the leads coming out of the connector that plugs into the motor. I'm glad he suggested this, as i was going to replace the main board. Saved me $$.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help