Results 1 to 8 of 8
Threaded View
-
07-14-2020, 06:48 PM #1
- Join Date
- Jun 2020
- Posts
- 5
Flash Forge Creator Pro PETG printing Help
Hello Everyone, Thank you in advance for the help . I have attempted for the last 30 days to get this right but i cant seem to get it right. I can print the designs on PLA with no problem but when I go to print on PETG its a disaster . The best combination I was able to find was to print at 240 C on both extruders, cooling fans all the way off , plate at 75. I also slowed the print down to 50 and that helped some. I am using flash print and I cant seem to identify any other variables . See pictures PLA on right and PETG on left
Last edited by alopez0105; 07-14-2020 at 07:09 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help