Results 1 to 5 of 5
Thread: constant layer shift
Threaded View
-
06-28-2020, 11:40 PM #1
- Join Date
- Jun 2020
- Posts
- 5
constant layer shift
Ive been getting a single layer shift lately in the x-axis and I can't figure out what the issue is. The shift tends to be around the same height but not exact layer. I have already tried the following;
check and adjust belt tension
add z-hop (no effect)
reformat sd card
IMG_20200628_103911.jpg
What confuses me is that z-hop did not help, which rules out the nozzle bumping into the print during travel. Any other suggestions would be appreciated
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help