Results 1 to 2 of 2
Threaded View
-
06-23-2020, 04:21 AM #1
- Join Date
- Jun 2020
- Posts
- 1
Resin warping on Creality LD-002R (big flat piece)
Hi there! Maybe some of you long resin gurus will know why am i getting such bad warping on my prints, I will attach pictures below of how my settings look and my orientation and how and where it bends.
eager to learn and fix this as its deiving me crazy!
I tried different exposure , lift speeds , support offset , several other support options (adding more as you can see there are plenty) Every time warping happen on first 15-20%
I tried removing supports and curing, curing with supports, curing in cold water, like everything
I am using chitubox
Resin I tried was Prima creator light gray and anycubic standard gray. both have same results
supports.jpgwarp line.jpgwarp1.jpgwarp2.jpgchitu settings.jpgLast edited by Ronin; 06-23-2020 at 04:30 AM. Reason: adding chitubox settings picture
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help