Results 1 to 10 of 23
Threaded View
-
04-29-2014, 10:18 AM #22
Certainly you can power them directly from a power supply. You might want to add a switch to turn them off since the circuit is outside of the printer control board and GCode switching. I'm bummed now because I took my power supply and trimmed off all of the extraneous wires and left only the ones that feed my controller. I then taped and used head shrink on the nub of trimmed wires. Now I'll have to undo all of that to tease out a pair of 12V leads. Some light in there will be nice as I'm always in there there with my small LED flashlight.
Bambu P1S/AMS
NVision4D http://nvision4d.com
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help