Results 1 to 8 of 8
Threaded View
-
05-31-2020, 09:28 AM #2
- Join Date
- May 2018
- Posts
- 566
can't see any pictures but Esun PETG prints at 230C. PETG also needs to be dry so you may need to run it in a food dehydrator for 6-8 hours. But normally even dry PETG will bubbles and pop if printed too hot.
Switch to prusaslice and don't waste time learning cura
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion