Results 1 to 10 of 11
Threaded View
-
05-18-2020, 01:44 PM #1
- Join Date
- May 2020
- Posts
- 6
Trying to print a funnel, bad results
Hi all, I just got my 1st 3d printer and am not having much success printing.
I am trying to print a small funnel, and it looks ok from the outside but is all messed up in the inside Please tell me what I'm doing wrong. I made 2 funnels so far, one using slic3r and one using cura. (I got the stl file from thingiverse and did not modify it)
I also tried printing a gcode file I downloaded from the printer manufacturer's website and that came out pretty good, so that leads me to believe the problem is in the slicing step.
Here are the settings I just used in cura to print my 2nd funnel:
layer height 0.1mm
wall thickness 0.8mm
wall line count 2
top/bottom thickness 0.8mm
top thickness 0.8mm
top layers 8
bottom thickness 0.8mm
bottom layers 8
infill density 20
infill pattern grid
printing temp 180
speed 40 mm/s
enable retraction yes
build plate adhesion type brim
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help