Results 1 to 6 of 6
Threaded View
-
04-05-2020, 01:14 PM #3
well if it's for radio controlled servo motors, then 3d printed pla should be fine.
3mm pla is also pretty stiff and strong.
I usually go to 2mm for most things.
well if it's for radio controlled servo motors, then 3d printed pla should be fine.
3mm pla is also pretty stiff and strong.
I usually go to 2mm for most things.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help