Results 1 to 2 of 2
Threaded View
-
02-15-2020, 01:29 AM #1
- Join Date
- Feb 2020
- Posts
- 3
Help: UNKNOWN COMMAND G29 (and others) trying to use bltouch
Hi,I've been using an Ender 3 for 1 year and I'm quite happy with it.Recently I replaced the stock mb with a SKR MINI E3 V1.2 and the printer became silent.Then I replaced the stock TFT with a Bigtreetech TFT35-E3 V3.0 touchscreen: very usefull.Then I installed a BLTOUCH clone but there's something not matching...When I power on, the bltouch lights up and the brobe goes up and down twice.When I go to levelling menu (touschscreen) and press autolevel I get UNKNOWN COMMAND G29.Other levelling functions give me other errors like UNKNOWN COMMAND M280 and so on.It seems many commands are not recognized.What's the problem here?
These are the components:
https://www.amazon.it/BIQU-DIRECT-co...ustrial&sr=1-1
I'm not an expert, but to my understanding SKR MINI E3 V1.2 does not recognize a set of commands sent by TFT35.
It's a firmware issue or what else?
How can I get the whole thing working? Thanks in advance.GicoLast edited by Gico; 02-15-2020 at 01:42 AM.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help