Results 1 to 6 of 6
Threaded View
-
01-26-2020, 08:14 AM #1
- Join Date
- Jan 2020
- Location
- London
- Posts
- 4
Threads printing successfully, but not fitting successfully (Makerbot Z18)
Hey - could really do with some help 3D printing threadsThe print quality seems to be pretty good, but when I go to screw the parts together, I get large levels of resistance once the bolt reaches the other end of the nut, and then it won't go in any further. Please see pictures and details below:
- Printer: Makerbot Z18
- Extruder: Makerbot Smart Extruder
- Slicer: Makerbot Slicer
- Filament: Makerbot standard PLA
- Source: Threads generate from Fusion 360 and exported as STL
- Thread: M20 x2.5 6g
- Both the bolt and the nut were printed vertically
I even increased the tolerance by offsetting the faces on the threaded bolt by 0.2mm. I realise I could buy an M20 tap and die, but am I right in thinking I shouldn't be having an issue with this printer/thread size. Any help would be greatly appreciated... I'm lost and confused!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion