Results 1 to 10 of 25
Threaded View
-
12-28-2019, 03:16 PM #25
- Join Date
- Oct 2019
- Posts
- 52
Got it going now. They both work now but on 100% speed or 0. If I try to lower it down even to 99% it will stop.
Got it going now. They both work now but on 100% speed or 0. If I try to lower it down even to 99% it will stop.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion