Results 1 to 10 of 36
Thread: GEEETech i3 32bit Rework
Threaded View
-
12-22-2019, 04:15 PM #3
I have decided I want to print these parts in translucent blue PETG. And that spool isn't scheduled to arrive until tomorrow. So for now I will just keep designing the parts. I also wish to do a similar thing with the displays as what I did with my Black Widow rework. It would be cool to have a similar look to my printers. Get my own style going. So I am mounting the displays down low and leaned back at 45 degrees. voltage display from the buck lm2596 step down converter on the left and tft32 touchscreen on the right. I am integrating the display mount and a 20mm tall brace for the lower Z rods into the same part. I still have to produce the design for the right side. Here is my design for the left..
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion