Results 1 to 3 of 3
Threaded View
-
12-09-2019, 06:59 AM #2
supports usually have their own set of settings anyway.
Even cura should do that. plus if you're using a dual extruder - then the second extruder will also have it's own settings. Just tell it to use the second extruder for supports.
You can't print support then print a print with a single extruder printer. as the print head would knock the support out of the way.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion