Results 1 to 10 of 13
Thread: Linear Guide Woes
Threaded View
-
10-25-2019, 11:43 AM #11
I am gonna stick with the regular steppers. They are all 0.9 degree or 400 step/rev. motors and I did double up on them so there are 2 for each axis. And I am upgrading my controller to a 32 bit flavor so I can drive these LV8729 drivers at 1/128 microstepping.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion