Results 1 to 10 of 51
Threaded View
-
09-28-2019, 10:47 AM #18
Back on the subject of this thread With the opening statements on materials used I honestly don't understand why you would use anything other than linear rails. I am going through this conversion with other things on one of my machines right now. You can look there at the last page or two and see what they look like going in if you'd like. They were also cheap. I have found great success with ebay rails so far. For some reason buying the sliding blocks by themselves seems to be a loosing proposition. But the rail with the block already on it has slid smooth every time. I got mine from here: https://www.ebay.com/itm/MGN12H-Line...53.m2749.l2649 You can get them in different lengths and you will also need to get sliding T-slot nuts for 3mm screws. I got those here: https://www.ebay.com/itm/50pcs-M3-Sl...53.m2749.l2649 And you will need to get m3x8mm allen head screws. I got these: https://www.ebay.com/itm/Stock-50pcs...53.m2749.l2649 And the holes to mount stuff to the sliding blocks are the same m3 threaded holes.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help