Results 1 to 8 of 8
Threaded View
-
09-04-2019, 04:55 AM #8
yes, to be fair most extruders will go up to 260c.
If you want to print abs (no idea why - but you might) then generally it prints a little higher than 240c, as does most nylon, pet-g depends who you ask :-)
But yep the qidi is an open source machine as far as filament goes.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion