Results 1 to 3 of 3
Thread: benchy not sticking
Threaded View
-
08-15-2019, 04:18 PM #1
- Join Date
- Aug 2019
- Posts
- 2
benchy not sticking
So I did my first ever attempt att printing a benchy on my cr-10 mini
First attempt came off after first layer, printed straight on glass bed
Second attempt I increased temperature for first layer from 200c to 210c, increasted bed temperature from 50c to 60c, releveled the bed and added a layer of hair spray.
It seemed to work well, but 95% into the print it popped off again.
3rd attempt I tried releveling again and once again it popped off after the first layer.
Any ideas?
67885108_420146288600533_4591121921172570112_n.jpg
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery