Results 1 to 10 of 16
Thread: Ender 3 Pro print problem...
Threaded View
-
07-28-2019, 05:30 AM #4
- Join Date
- Jul 2019
- Posts
- 11
I did find Zhop in the software. It was set to 0.0 i am unsure on what to set it to. I tried 0.075 and the problem is still there. ill check out Prusa. Here is a screen shot of theCreality Slicer Zhop...Thanks for the help i have been working on this all night.
Capture5.jpg
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help