Results 1 to 5 of 5
Threaded View
-
07-09-2019, 11:13 AM #1
- Join Date
- Oct 2018
- Posts
- 8
Replaced extruder/hotend - Reduced quality, shifting in layers?
3dpUnlimited 1000
V6 hotend
0.6mm nozzle
Matterhackers Pro PLA 3mm
215C extrude temp
70C Bed temp
I was having issues with a clogging V6 hotend. I swapped over to my second extruder (same type) which has had almost zero use.
I physically swapped the extruder assembly to the front.There is a big difference in print quality now. It looks as though there is slop in the lead screws but I find it hard to believe because the prints literally a day before were much better (and all the ones before that).
Below are a couple of images before extruder change and after.
The nozzle is the same. 0.6mm though.
Before:
AfterLast edited by not-a-number; 07-11-2019 at 09:53 PM.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help