Results 1 to 4 of 4
Threaded View
-
07-02-2019, 08:34 AM #1
- Join Date
- Jul 2019
- Posts
- 3
CTC makerbot printing problems gap between vertical walls
hi folks new here and have just got my first 3d printerthe printer was printing fine with PLA and i have now switched over to ABS and am now having problems with printing when it prints it does not stick the all the layers of the solid walls together its almost as if it is printing 2 wall vertical wall rather than one solid one as there is a gap between them its almost as if its not putting enough ABS down or the layers are to far aparti am using makerbot desktop slicer software using 4mm nozzle printing at 250 degrees the photo below should be one solid 2.5mm thick wall all roundany advice welcomed as i am stuckmany many thanksJon
Last edited by hunggaur; 07-02-2019 at 08:35 AM. Reason: typo
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery