Results 1 to 10 of 46
Thread: Mpcnc
Threaded View
-
05-16-2019, 10:18 PM #15
Found a problem with the MPCNC Design.
Bearing 1.jpg
You can see in the middle assembly, that the 5/16 bolt head and the Bearing are touching, This will have to have thinner Bolt Head.
Will be Grinding about 1/2 the thickness of the bolt head away to allow the bearing to freely spin...
Bearing 2.jpg
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help