Results 1 to 10 of 46
Thread: Mpcnc
Threaded View
-
05-13-2019, 04:42 PM #11
As far as I can tell in Cura when you hover the cursor above the print speed 40% with my settings is 4.5mm^3 Per Second and 76% is 8.5mm^3 Per Second.
With a .4mm nozzle at a layer height of .28mm. It further States that the Print will complete at # of hours and it does.
Print Speed.jpgLast edited by Roberts_Clif; 05-13-2019 at 04:54 PM.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help