Results 1 to 10 of 15
Threaded View
-
04-27-2019, 08:04 PM #1
- Join Date
- Feb 2019
- Posts
- 5
Can anyone help before my printer is thrown out the window
I have about had it with my basically new Qidi X-plus printer. I have tried so many various settings and really cannot get anything even remotely detailed to print correctly. Now I can't even get a basic keychain to print. My last print ended up in a ball around the nozzle. I even leveled it prior to and it was fine. Now I tried running it again after another level and the image shows what happened there. I am using Hatchbox PLA filament.
Here are my temp settings: Temp= 190c initial platform temp=75c and then platform temp=65c.
I have ranged with this setting quite a bit and nothing seems to really work. I would really love to trust my printer to do more detailed prints, but if I can't even get a 30 minute keychain to print there is no way it will print a 10 hour or longer design.
Can anyone please help me here??
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion