Results 1 to 10 of 16
Threaded View
-
04-15-2019, 06:57 AM #3
sounds like trying to print either too cold or too fast, or both.
The flashforge transparent red is superb stuff, but does like a little heat.
I print it from 200c to 220c depending on speed and layer height.
Go into the advanced flashprint menu and have a little play with extruder temperatures.
Standard settings are never much good :-)
Get control of it.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion