Results 1 to 10 of 11
Thread: 3d printing pen
Threaded View
-
04-05-2019, 12:31 PM #7
have you looked at the soldering iron things ?
there's one specifically for mucking about and post processing 3d prints.
https://www.retouch3d.com/
That goes from 100c up to 300c
Or just use a soldering iron and make some heads out of copper sheeting or thin tubing.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion