Results 1 to 10 of 35
Thread: FLSUN Printer Issue
Threaded View
-
03-13-2019, 11:33 AM #27
Using a terminal to control the 3D Printer Send "M119 - Endstop States "
Then manually press the end-stops to see if all work.
Then for the Proximity sensor you could use a spatula and tap the senso.r.
I still hear the stepper grinding, maybe the switch works and the end-stop rest plate is not pressing the switch blade...
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion