Results 1 to 9 of 9
Thread: print moving upward as printed
Threaded View
-
01-23-2019, 05:25 PM #1
- Join Date
- Jan 2019
- Posts
- 8
print moving upward as printed
When printing , print moves upwards as it is being printed . First layer goes down good. Then each layer moves up a little . Using a ZD-one printer. Looked for solutions online said to reduce speed . Turned down everything to 25 mm/sec .No help.
Cura settings Layer Height .1, Shell thickness.08, top/bottom thickness.06, fill density 20%, print speed 25mm/s, printing temp 220, bed temp 65, Speed travel ,bottom layer, infill, outer and inner shell speed all 25mm/s. using pla filament. It is firmly printed on bed have to pry up to get it off. Suppose to be a dog tag shape as a bone.20190123_181740.jpg20190123_181740.jpg
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion