Results 1 to 10 of 23
Thread: Wobbly print
Threaded View
-
01-12-2019, 02:12 PM #1
- Join Date
- Jan 2019
- Posts
- 12
Wobbly print
Hi, new here and new to the 3D printing world. Just assembled my creality ender 3 pro and did my first prints. A problem I had was that the thread was wobbly/wavy instead of straight in some layers. Followed the instructions from the maker and by a youtuber. Also did a leveling test print which looked ok.
Any ideas of the reason to why the thread turned out this wobbly?
Nozzle: 0,4 mm
nozzle temp 200 C
bed temp: 60 C
wall layers: 3
layer thickness: 0,2 mm
one factor is room temperature it?s lower than a normal indoor temperature. It?s like 10-12 C instead of ~20 C. Not sure if this can play a part.
it?s printed upside down, so first image is in the beginning of the print, second is in the end
3B7D2F72-500D-44B5-9C4D-2510D6A648D8.jpg
4DF3E3C7-B7D1-4AA0-A49C-34740668165E.jpg
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery