Results 1 to 10 of 13
Thread: Material identification
Threaded View
-
01-09-2019, 07:12 AM #6
- Join Date
- Jun 2014
- Posts
- 885
The part that I have is also commercially produced and is, as noted, SLS printed. I don't think that the "commercial" aspect is a valid reason for rejecting the process. The surface grain is quite clear in the larger image on StackExchange. SLS printing is practical in larger volumes than smaller, due to the desirable objective of filling the print volume, making it more suitable for commercial purposes than FDM/FFF
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion