Results 1 to 8 of 8
Thread: Unknown Print Failure
Threaded View
-
11-08-2018, 11:57 PM #1
- Join Date
- Nov 2018
- Posts
- 5
Unknown Print Failure
Hi, this is my first post on this forum.
Recently a part I was trying to print failed for a reason I can't determine. The printer is a Raise3d Pro2, printing Pro PLA 1.75mm filament.
My settings were:
- high quality template
- 0.1mm layer height
- 2 shells, 30% infill (model was small enough that it didn't use any infill)
- 30mm/s outer, 50 mm/s inner
- brim with 40 loop lines
- 205 deg nozzle, 60 deg bed temperature
I've attached some pictures. When I stopped the print, the job had come loose from the bed, but I don't know if that caused the failure or was caused by the failure.
Can anyone offer any advice?
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help