Results 1 to 7 of 7
Threaded View
-
08-25-2018, 05:57 PM #1
- Join Date
- Aug 2018
- Posts
- 1
obsurdly long print time for a rather small print
Good Evening,
I have a big problem with printing this panel.
It should be just an hour print but cura either doesn't slice it at all or give me a print time of 2 hours.
When I print it anyways the printhead will just wander off to one corner and gets stopped because it reaches the boarder of the Buildplate.
I have no idea what could trigger this weird glitch. It's just a simple Plate with a few cutouts for some switches.
Things I already tried:
- remodeling a couple of times
- try to repair the stl file with an online tool
- moving / rotating it around in cura
I really hope you can help and I apologize for my bad English
Thank you and have a nice day
-Update_
I cut the piece in half and the 5 putton layout on the left prints no problem but the squared buttons still don't want be printed.Last edited by Barzar; 08-25-2018 at 06:16 PM.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help