Results 1 to 4 of 4
Thread: PLA Tempatures
Threaded View
-
07-07-2018, 04:10 PM #1
PLA Tempatures
I have two 3D Printers 3DP11 and 3DP12
The 3DP11 prints at 196C - 12 volt supply
The 3DP12 prints at 202C - 24 volt supply
So I was determined to see if I could find a happy medium where both printers could print at the same temperature.
The bed temp is the same for both 42C.
If I raise the temperature of the 3DP11 to 200C the PLA is too hot and edges warps or bulges.
If I lower the temperature of the 3DP12 to 198C the PLA is too cool and does not extrude correctly.
Everything I see suggests I should have a larger temperature window for my PLA filament.
Am I missing something.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion