Results 1 to 5 of 5
Threaded View
-
04-02-2018, 10:10 AM #1
- Join Date
- Mar 2018
- Posts
- 21
CR-10S Assembly Question about Z Axis Lead Screws
So I just got the CR-10S and there was no mention in the instructions about making the 2 Z axis lead screws equal, or rather in sync, with each other. So videos of other machines show you manually turning the lead screws until the Z carriage bottoms out on two measurement spacers, one on each side of the carriage.
If this not necessary on this machine?
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion