Results 1 to 4 of 4
Threaded View
-
12-04-2017, 03:48 AM #4
- Join Date
- Oct 2015
- Posts
- 35
Stratasys Soluble Support material is not PLA, and to remove you use a heated water tank with diluted sodium hydroxide. Wear gloves and goggles when handling the solutions and be prepared to wash/neutralise the parts for several hours after to remove the sodium hydroxide from the internal gaps in the parts, and several hours in an oven to dry them.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion