Results 1 to 8 of 8
Threaded View
-
11-26-2017, 12:25 PM #1
- Join Date
- May 2014
- Location
- Fishers, IN
- Posts
- 22
Creator (wood): Is my motherboard toast?
I've had my Flashforge Creator for a while and have used it with great success, however today I was cleaning it and I know I broke something, I just don't know what.
I was cleaning under my heated build plate, and here's the part I now know was stupid, I was using my metal bed leveling shim to knock a piece of scrap out of the way and I touched the contacts for the heated bed and saw a spark.
Now my display is blank and the machine doesn't respond. All power seems to be showing (display backlight, board has lights, etc), but no response from buttons.
Is there a checklist somewhere or do I just go right to ordering another Mightyboard? And is direct from Flashforge the most reliable route?
The board label says:
2012 ff3dp.com
Designed by FlashForge
based on Makerbot mightyboard
Flashforge Creator
Rev BLast edited by indy3der; 11-26-2017 at 12:36 PM.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)