Results 1 to 10 of 11
Threaded View
-
08-20-2017, 10:07 AM #6
If this is a Hictop 3DP12 this line should be
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 94.4962144}Last edited by Roberts_Clif; 08-22-2017 at 07:06 PM.
If this is a Hictop 3DP12 this line should be
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 94.4962144}
Last edited by Roberts_Clif; 08-22-2017 at 07:06 PM.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help