Results 1 to 4 of 4
Threaded View
-
08-18-2017, 09:28 PM #1
- Join Date
- Aug 2017
- Posts
- 2
First model, what obvious mistakes am I making?
Hi
This is my first attempt at a model. I'm trying to make a plate to clip to the back of an Amiga 1200 case, to which I can attach the various ports from a Raspberry Pi (the Pi itself would be elsewhere in the case, not directly attached to this plate).
I don't have a printer of my own and would be sending this off to a local service. Are there any glaring problems in the model? I've tried sticking to a minimum thickness of 2mm wherever possible.
Thanks for any feedback or advice.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion