Results 1 to 2 of 2
Threaded View
-
06-09-2017, 01:51 PM #1
- Join Date
- Jun 2017
- Posts
- 2
Need recommended settings for this print
This part is 190mm X 90mm X 6mm. I am printing ABS on a ctc makerbot clone with 250C extruder temp and 90C bed temp. Any recommendations on the print settings I should use on Simplify3D? I've tried too many settings to list and have had 0 luck. Any help would be greatly appreciated. I'm assuming the part is attached!
Mold 3.stlOval Prints.bmpLast edited by Maker1542; 06-13-2017 at 12:15 PM.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery