Results 1 to 5 of 5
Threaded View
-
05-11-2017, 09:14 AM #1
- Join Date
- May 2017
- Location
- Israel
- Posts
- 2
gaps in printing problem - mainly in rounded models.
hope someone can spot this problem...
I have the following printing problem in various models - some areas have holes/gaps/printed incorrectly. I tried already with lower temperature (170C) and higher temperature (190C) but seems like this is the right temperature (180C). also tried to change the number of perimeters from 3 to 6.
gap1.jpggap2.jpg
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion