Results 1 to 1 of 1
Threaded View
-
03-16-2017, 07:44 PM #1
- Join Date
- Mar 2017
- Posts
- 1
Need help getting "echo endstops hit z:2.9" error
I am trying to install Skynet v1.1 on my Anet a8. It works but about 4mm up from the bed it stops printing and I get this error "echo endstops hit z:2.9" in cura. Any help would be greatly appreciated.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion