Results 1 to 10 of 354
Thread: 370mm X 250mm X 300mm
Threaded View
-
03-13-2017, 08:55 PM #11
- Join Date
- Nov 2016
- Location
- Earth
- Posts
- 28
You are not going to get a full 400mm on the x-axis, even with mods. Stock the max build size is 350 x 250 x 250. You can extend the x-axis to about 270 with a custom extruder mount or if you switch to a Titan style extruder and pancake motor.
FYI, your kit should come with that external mosfet if it is a v2 board. The V3 bed supposedly does not need it, but I would put one on anyway. There are not enough V3 heatbed kits out there yet to know for sure if they have resolved their power draw issues.
I didn't get to the point of printing this weekend. With the change in the weather here (snow and damned cold) I just want to hybernate for a month or so until the nice weather arrives. Made yogurt and cleaned the house instead.Last edited by fredk; 03-13-2017 at 09:00 PM. Reason: corrected extruder name
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help