Results 1 to 5 of 5
Thread: Help with Simplify 3D
Threaded View
-
02-03-2017, 02:39 PM #1
- Join Date
- Jan 2017
- Posts
- 4
Help with Simplify 3D
I have Simplify 3D that I purchased about 6 months ago to use with my Wanaho i3. I just recently got the CTC Dual and am having a hard time getting good prints when using Simplify 3D. I have tried using the default settings for this printer and tweaking them some but no matter what I do the prints come out with several issues. The first is what looks like ringing, second looks like temporary under extrusion and lastly the top walls aren't filling in completely. I have tried going both ways on the extrusion multiplier and it doesn't help. I also added extra top walls, which didn't help either. I can slice the same stl with Makerbot Desktop and I don't have the same issues. The prints from it look good so I know it's not a hardware issue. Does anyone have any pointers on what to do or a fff file that could point me in the right direction? I can post some pictures if it will help. Thanks a lot.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion