Results 1 to 10 of 10
Threaded View
-
02-03-2017, 02:18 PM #1
- Join Date
- Jan 2017
- Posts
- 45
Problem with certain print. Support coming loose.
I have attempt to print this 5 times with automatically generated supports. About 2 hours to 2 hours and 30 minutes into the print a support will come loose. I have tried adjusting different settings, but at a loss now. Others have been able to print this without issue according to comments.
Any help would be greatly appreciated.
http://www.thingiverse.com/thing:714533
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery