Results 1 to 6 of 6
Threaded View
-
01-30-2017, 08:18 AM #1
- Join Date
- Aug 2016
- Posts
- 25
Pegasus 12 Melted Wire at Power Supply
Hour 6 of a 7 hr PLA print and no heat to the bed.
Investigation shows, melted negative 16 AWG wire from the power supply to the relay. I used 16 AWG per the kit instructions. That connector is fused to that terminal now.
Causes? Solutions?
I think I am going be running my thermal camera on things for a while after I fix this issue.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help