Results 1 to 6 of 6
Threaded View
-
01-23-2017, 01:45 AM #2
- Join Date
- Oct 2015
- Posts
- 35
I used the Analog input pins [left of the main chip in your image]
You have to change the Marlin sketch, specifically Pins H to tell the board which pins to look at for temperature.
https://groups.google.com/forum/#!to...ax/DAP-ylLgge8
I discussed it in the linked Google Group
Hope that helps
Rich
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion