Results 1 to 5 of 5
Thread: Resetting my printer
Threaded View
-
01-15-2017, 02:48 PM #5
- Join Date
- Apr 2016
- Posts
- 120
It sounds like you have flashed the wrong version of the firmware. You need to make sure you use the correct version. Not sure which one this will be for your printer, but the Sailfish manual is your friend here.
I remember reading a post with someone who had had exactly the same problem as you. He reflashed the printer to the correct version and all was well again. Sods Law, I cannot find the info now!!
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion