Results 1 to 10 of 13
Thread: Layers not smooth
Threaded View
-
12-29-2016, 05:28 AM #13
- Join Date
- Apr 2016
- Posts
- 120
Here's my first go at printing the object. The printer was sat @ -5 degrees C last night, so there is a little bit of warping going on!
https://drive.google.com/file/d/0B5F...ew?usp=sharing
https://drive.google.com/file/d/0B5F...ew?usp=sharing
Generally though, everything looks as I would expect. A little bit of wobble, but this is expected with these operating temps, as the printer is calibrated for room temperature and really struggles when it gets that cold!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion